收藏本站
Evaluation Kit Manual - Revision A
B. Precautions for ESD (Electrostatic Sensitive Devices)
PhlatLight? devices are electrostatic sensitive. Static Electricity
is generated by the simple contact and separation of materials,
by movement of people and by air currents. ESD-type damage can
create hidden failures. This means that the failure may not actu-
ally show up until the device is used for a period of time. The fol-
lowing procedures are essential in minimizing the risk of damage
to PhlatLight? devices due to electrostatic discharge.
1. When a person carries a PhlatLight? device (in conductive car-
riers or trays) to another bench, prior to placing the units on a
static dissipative/conductive surface, he/she must first touch
the surface with his/her bare hand in order to drain any static
electricity from their body.
2. Handling all PhlatLight? devices shall be done at ESD con-
trolled work station. All ESD workstations shall have conduc-
tive/static dissipative work surfaces to prevent generation and
build-up of static charges. Each mat/laminate surface shall be
connected by a grounding wire to ground.
3. Personnel grounding is required prior to handling any Phlat-
Light? devices. This can be done by using wrist straps or
ground cords.
4. Tweezers, gloves or finger cots must be worn when handling
all PhlatLight? devices.
5. PhlatLight? devices should be stored in covered conductive
trays whenever possible.
C. PhlatLight? Window Cleanliness
The glass window in a PhlatLight? device serves as a protection
for the die and also for the wire bonds. It is important that the
window is clean to ensure optimum brightness when the device is
in operation. The following can be done to keep the window
clean:
1. Do not touch the window with bare fingers.
2. Always use tweezers, gloves or finger cots while handling de-
vices.
3. If there is any debris on top of the window (e.g. caused by the
thermal interface material), first saturate Texwipes Tx 609 (or
equivalent) cloth or Q-Tips in Isopropanol and then clean the
affected surface.
Confidential ? Luminus Devices, Inc. - All Rights Reserved
Page 13
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
DK-409N-1 KIT DEV PHLATLIGHT CBM360 LED
DK-414N-4 KIT DEV PHLATLIGHT CBM380 LED
DK-PS21765 KIT DEV INTERFACE IPM MINIDIP
DK-PS21965 KIT DEV INTERFACE IPM MINIDIP
DK-RV-1.8-TRK-33 EVAL KIT SQUIGGLE MOTOR + SENSOR
DK-SI-4S100G2N KIT DEV STRATIX IV TRANSCEIVER
DLP-2232H MODULE USB ADAPTER FOR FT2232H
DLP-2232ML-G MODULE USB ADAPTR FOR FT2232D LP
相关代理商/技术参数
DK13FX 制造商:DYNEX 制造商全称:Dynex Semiconductor 功能描述:Fast Switching Thyristor
DK-14049 制造商:ULVECO 功能描述: 制造商:Ulveco 功能描述:
DK140855 制造商:TE Connectivity 功能描述:
DK14-1.0 制造商:YAMAICHI 制造商全称:Yamaichi Electronics Co., Ltd. 功能描述:1.0mm High Density FLEX (300V, 105°C)
DK14-1.0M 制造商:YAMAICHI 制造商全称:Yamaichi Electronics Co., Ltd. 功能描述:1.0mm High Density FLEX (300V, 105°C)
DK-14103 制造商:ULVECO 功能描述: 制造商:Ulveco 功能描述:
DK144119 制造商:TE Connectivity 功能描述:
DK-14753 制造商:SLPOWER 制造商全称:SL Power Electronics 功能描述:IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIPMENT (IECEE) CB SCHEME